Re: DIY Tiny OLED I2C full graphics controller
And It compiles now. I downloaded the 1.1.x version and it's compiled. I have to go take care of some personal business and will upload the firmware to the board when I return and report the results....
View ArticleRe: DIY Tiny OLED I2C full graphics controller
And I am happy to report it mostly works. The only real issue I have is with the encoder. You have to turn the thing three clicks to get it to move to the next position on the menu. The encoder also...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
In Conditionals.h just comment out the line #define REVERSE_ENCODER_DIRECTION and in Configuration.h uncomment and adjust the values of #define ENCODER_PULSES_PER_STEP 1 #define...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
That does solve it for me. Perfect! Some tweaking on the menu steps and it now works as I prefer. I've added the buzzer and need to complete the configuration of my Prusa-ish printer. This was a big...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
You're welcome! I'm glad to know that you got it working now. :-)
View ArticleRe: DIY Tiny OLED I2C full graphics controller
And I am happy to report with some help from the folks on the dev team I have this OLED/Encoder/Beeper working on Repetier 1.0-dev I'll post the settings to configure this later this week once I can...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
we have the lastest marlin bugfix 1.1.x that works with TinyOLED, please have a look of details from www.facebook.com/hkmakers.hk
View ArticleRe: DIY Tiny OLED I2C full graphics controller
we have the lastest marlin bugfix 1.1.x that works with TinyOLED, please have a look of details from www.facebook.com/hkmakers.hk [attachment 96332 IMG-20170404-WA0001.jpg]
View ArticleRe: DIY Tiny OLED I2C full graphics controller
Next upgrade - a 2.42" OLED display ? [www.ebay.com] :-)
View ArticleRe: DIY Tiny OLED I2C full graphics controller
Quotebipsen Next upgrade - a 2.42" OLED display ? [www.ebay.com] :-) I already have a 2.42" OLED working. However that one you link on FeeBay will not work. I have 2 and I've tried. They claim it's...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
Hi, I'm looking to use the side mounted rotary encoder version of this with a 2.42" inch ssd1309 oled display, what changes do I need to make to the scad for the larger display(I'm still fairly new to...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
As the 2.42" OLED is much bigger and has the pins on the side instead of at the top, I guess modifying the 1.3"/0.96" desing of the display cover is likely to be more difficult than redesigning a...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
I was considering using a ribbon cable to connect the display to the pcb, is there any resources you would recommend that would help me to understand the code in the scad file? any hints would be...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
The SCAD file is commented - but I am sorry, no other explanations for it are available. And I admit that the technique I used here is somewhat untypical for OpenScad: Essentially, each object...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
Quoteenif As for the I2C problem on the Arduino Due that caused some conflict when activating simultaneously the I2C OLED (using the U8glib I2C routines) and the I2C EEPROM (using Arduino's Wire.h), I...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
Hi all, I've solved the issue for the EEPROM I2C on Arduino Due (RAMPS4DUE project) in a very easy way. I've simply moved the EEPROM on the 2nd I2C port available on the Due ( SCL1 SDA1) and made few...
View ArticleRe: DIY Tiny OLED I2C full graphics controller
Can someone please help me patching my marlin I HAVE NO IDEA WHAT PUT WHERE :S I have1,3" oled PLEASE
View ArticleRe: DIY Tiny OLED I2C full graphics controller
Please give us more details (and maybe pictures) of what hardware you actually have (display controller, 3D printer controller) and which version of Marlin you are trying to patch.
View ArticleRe: DIY Tiny OLED I2C full graphics controller
Hi It is MKS gen 1.4 display is 1.3" latest version of marlin 1.8.5 S.T.E.V.E - CoreXY 3D Printer - [www.thingiverse.com]
View ArticleRe: DIY Tiny OLED I2C full graphics controller
What kind of "1.3 inch oled display" do you have? Unfortunately you don't give any more details on that part - which is the crucial one to answer your question.... Did you really build the "Tiny OLED...
View Article